Tyre pressure warning light: What is it?

tyre pressure warning light

Has a tyre pressure warning light appeared on your dashboard? The yellow symbol looks like the cross-section of a tyre with an exclamation mark inside. But what does the warning light mean, and what should you do about it?

What is the tyre pressure warning light?

The warning light is an alert message to the driver that there may be a loss of air pressure from one or more of the vehicle’s tyres. It comes from the Tyre Pressure Monitoring System (TPMS), an active safety technology that has become a legal requirement for all newly launched and factory updated passenger cars sold in Europe since November 2014.

Tyres represent the only contact your vehicle has with the ground, so maintaining the correct tyre pressure has many safety and efficiency benefits. These include:

  • Prevents accidents caused by a critical decrease in tyre pressure
  • Helps the vehicle perform predictably
  • Saves fuel
  • Reduces emissions
  • Optimises tyre wear

How does a Tyre Pressure Monitoring System work?

There are two types of TPMS: direct and indirect. Direct systems are installed in all current Lexus models as it is the most accurate method of electronic tyre pressure monitoring. This method uses a battery-powered sensor integrated into the valve assembly (see images below) to physically measure air pressure from within the tyre cavity itself.

Data from the sensor in each wheel is transmitted wirelessly to a control module connected to the car’s central computer, which prompts a visible alert for the driver if any of the tyres lose pressure. The control module is programmed with the unique serial numbers of the valves within the car’s system, which ensures that the TPMS assembly in each wheel only communicates with its host control module.

Some vehicles from other manufacturers adopt a more rudimentary indirect method that uses existing wheel speed sensors to ‘measure’ tyre pressure by detecting differences in the rate of wheel rotation. A tyre with less air pressure will have a smaller circumference and therefore spin at a faster rate than a wheel that has not lost air pressure.

What should I do if the tyre pressure warning light comes on?

If the warning symbol illuminates, the air pressure in at least one of your tyres will have dropped below a minimum tolerance level – often a deflation of around 20-25%. This may indicate a leak, puncture, or some other kind of damage.

Dramatic changes in ambient temperature, such as driving from a snow-capped mountain to a warm and sheltered valley, can occasionally cause direct systems to prompt an alert until the temperature has stabilised.

Irrespective of the circumstances, if the TPMS warning light comes on you should pull into a safe area and visually check the tyres. If any appear to be deflated yet undamaged you should try to re-inflate them to the correct pressure and reset the TPMS (see subheading below).

If the tyre has sustained more serious damage, it will be necessary to either continue your journey on the spare wheel, carry out a temporary repair using a tyre repair kit, or call an emergency breakdown service for a lift to a tyre centre.

tyre pressure warning light

How do I turn off the tyre pressure warning light?

Use the box below to identify how to access the TPMS reset facility in current Lexus models. The majority of models feature reset access within the software menu of the multi-information display in the main instrument cluster. The only exception is the RC F, which uses a physical reset button.

In the case of the RC F, owners simply need to turn the ignition on, then press and hold the TPMS button. The warning light will flash a couple of times and then extinguish, at which point the system has been reset. For systems accessed via a software menu, instructions for resetting the TPMS will be shown within the multi-information display.

UXSoftware menuVehicle Settings menu on multi-information display
RZSoftware menuVehicle Settings menu on multi-information display
NXSoftware menuVehicle Settings menu on multi-information display
ESSoftware menuVehicle Settings menu on multi-information display
RC FButtonUnder dashboard on driver’s side
RXSoftware menuVehicle Settings menu on multi-information display
RX LSoftware menuVehicle Settings menu on multi-information display
LCSoftware menuVehicle Settings menu on multi-information display
LSSoftware menuVehicle Settings menu on multi-information display

What should happen if I replace any tyres?

The condition and function of the TPMS valve and sensor assembly should be checked each time the tyres are replaced. This will involve a physical inspection and electronic diagnosis using a proprietary technology (example device shown in image below).

The integrated battery has a life expectancy of around ten years and cannot be replaced. Electronic diagnosis should reveal the health of the battery, which will help you decide whether to replace the entire unit at the same time as the tyre.

Although the main assembly of the valve is robust, parts exposed to the atmosphere can deteriorate over time. So if the battery level is adequate and the main unit is being retained, it would still be wise to have the grommets, washers, collars and cores (see image below) replaced as a matter of course.

tyre pressure warning light

Will changing the wheels affect the TPMS?

Due to the accuracy and complexity of direct measuring, the TPMS control module is designed to recognise and communicate with only one set of wheels at a time. So if you regularly switch wheels (such as changing from summer to winter wheels) it will be necessary for a qualified technician to reprogramme the control module through the vehicle’s OBD port.

There are occasions when it may be necessary to drive on a wheel that is not equipped with a TPMS valve, such as after a puncture when the spare wheel is fitted. Under such circumstances, the warning light will remain illuminated. The vehicle or tyre monitoring system will not be damaged but the vehicle cannot pass its annual MoT test if the warning light is on.

Do I still have to check my tyres manually?

Although TPMS is designed to deliver a safety alert in the event of a significant loss of tyre pressure, it does not replace manual inspections. Each tyre should be regularly checked to see if it is inflated to the correct air pressure and has sufficient tread depth.

Learn more: Lexus tyre pressure and size guide


    1. Hi there,

      Thanks for getting in touch. The tyre pressure is not displayed on the multi information display. However, we would advise for you to regularly check your tyre pressures and reset the tyre pressure monitoring system.


  1. The tyre pressure light came on so had all tyres checked and one replaced by local garage, the tyre pressure light now won’t go off, will it eventually or do i need to do something manually??

    1. Hi Jeanie,

      Thank you for getting in touch. The above blog post has a grid of all our models and how to access the TPMS reset facility. Once you have determined this, if it is a button, you simply need to turn the ignition on, then press and hold the TPMS button. The warning light will flash a couple of times and then extinguish, at which point the system has been reset. For systems accessed via a software menu, instructions for resetting the TPMS will be shown within the multi-information display.


          1. In my 2017 CT 200h f sport I haven’t the reset button under the dashboard!!! How it’s possible reset the alarm? I change wheel for winter/summer and I don’t want go to dealer… It’s possible? Thanks

          2. Hello Riccardo,
            Thank you for getting in touch with us.
            Please could you provide us with your UK registration?

  2. After a damaged tyre on my CT-200 (2017) model I have got a universal TPMS fitted instead of a Lexus original, (Due to the cost) I have reset the TPMS few times by pressing the button under the dashboard but the warning light keeps coming back, tyre pressure on all four wheels are OK, Is there anything else that I have to do in order to reset the TPMS and link this sensor to the control module?

  3. I have a 2018 plated CT200h Sport. According to the grid above, there should be a TPMS reset button below the dashboard on the driver’s side, but I cannot find it. No particular reason to need to at the moment, but am just puzzled by the fact. Any ideas?

  4. My Lexus IS regularly displays the tyre pressure sign when it has been standing in the cold. It goes out after about 5 miles of driving. Should it be doing this – I seem to have to check the pressures very regularly

    1. Hello Sue,
      Thank you for contacting us.
      Colder temperatures reduce the air pressure in your tyres, so the tyre pressure warning light may be on when you first start the car. However, when you drive your vehicle, the friction between the tyres and the road causes an increase in heat, which in turn causes an increase in tyre pressure, which is why the tyre pressure warning light then turns off. It sounds like the system is operating as it should.

  5. I have a RX450H Premier – how do I change the pressure readout to psi. It currently shows 2.6 bar but i’d prefer to see 36psi as I seems more accurate and what I’m used to. Can’t see anything in the settings to change this myself.

    1. Hi Keith,

      Thanks for getting in touch. Please provide your vehicle’s registration and we will check this for you. When you respond, your comment will not be published. We will take the reg, delete the comment and respond to your original comment, protecting your personal data.


  6. I have a 2020 premium sports edition Lexus NX. The tyre pressures do not appear to show the actual tyre pressures of each tyre. Only the low pressure indicator shows. Is this correct for a reasonably new Lexus NX?

    1. Hi Ian,

      Thanks for your comment. The NX comes with a tyre pressure warning system. It warns you when the tyre pressure is low, but it doesn’t provide real time monitoring of each individual tyre.

      We hope you’re enjoying your NX.


  7. Registration no FL10 YDJ
    69 plate – NX300 Fsport.

    I have the orange warning light showing. My manual was replaced by Lexus but cannot see where to access this information.

    I cannot access the display screen showing the 4 tyres with the pressure in each tyre.

    1. Hello John, thanks for your comment.

      We’d recommend getting in touch with your local Toyota Centre. The team there will be able to take a look at your NX in person to assess the problem and advise further. Thanks.

    1. Hello James,
      Thank you for contacting us.
      We are only able to advise on UK specification vehicles, so we would recommend contacting Lexus in your region for further assistance.

Leave a Reply

Your email address will not be published. Required fields are marked *